114 / 2018-08-24 21:08:06

Simulation Study on Plugged Intermediate Joint for 10kV Cable

plugged intermediate joint,electro-thermal coupling simulation,tests,monitoring system,10kV cable

The installation of existing cable joint is a time-consuming process and greatly affected by implement condition. This paper proposes a design for plugged intermediate joint for 10kV cable to simplify associated installation. First, we measure the dielectric property and conductivity for basic insulation materials of intermediate joint, including epoxy resin and silicon rubber, and characterize the relationships of the parameter with temperature and frequency. Second, based on the tested results, a finite element model for plugged intermediate joint has been established, and the electric field strength as well as the temperature distribution is obtained according to electro-thermal coupling calculation. The results show that the maximum field strength (1.32x106V/m) and temperature (79℃) appear in the vicinity of the interface between cable conductor cross-section and joint, verifying the validation of such a design. Moreover, the voltage endurance, partial discharge (PD) and temperature rise tests have been carried out experimentally on the fabricated intermediate joint, which coincides with the simulation model. Ultimately, we propose a design of intelligent monitoring system based on plugged intermediate joint, which is expected to help to analyze real-time state of cable joint. Generally, our findings may provide a guidance for a possible solution to update the current joint technology for 10kV cable.